Kimberly Baxter Packwood © 2001-2017
Rust and Clay Dyeing eBook!!!
Rust dyeing is a surface design method that adds dimension to your fabrics and fibers. I use the technique predominately on cotton or silk fabrics. Natural fibers take the rust colors better than synthetic fibers.
You can rust dye onto commercially dyed and/or printed fabrics. However, fabrics dyed using synthetic dyes, or those dyed with natural dyes take rust dyeing best as they usually do not have anti-stain coatings on them. When applying rusty objects to naturally dyed fabrics the colors will change. Iron, i.e. rust, is a modifier and is used as a mordant with natural dyes. Modifiers change the existing color via shifts in the pH levels. An example would be hibiscus or cochineal, each yield a red color, when you add iron they shift from red to purple. A minute amount causes this color change.
You can place rusty objects next to wet fabric and acquire rust patterning over time. However, vinegar will speed up the rusting process, it aids in breaking the rust particles free from the object that is rusting. Rusting occurs normally due to oxidation, i.e. contact with the air. Be patient. Rust dyeing with water takes about a week. Using vinegar produces color in less time usually twenty-four hours.
I use straight vinegar and all sorts of rusty objects to acquire my rust dyed patterns. Old nails and wire work well for this technique. Wire can be used for bound resist techniques, especially when wrapping the fabric around a rusty pipe. Or you can simply lay the wire in a loose pattern on the fabric and rust it in that manner.
Pole wrapping and bound resist techniques work well with rust dyeing. Simply wrap your vinegar-saturated fabric around a rusty pole, being careful not to tear the fabric, scrunch and otherwise manipulate the fabric to created patterning.
You can sprinkle iron mordant or iron shavings onto your fabric for other patterning. Iron mordant is preferable to shavings. Shavings are often sharp things that can cut you or the fabric. Metal shavings may be coated in machinery oil which would put unwanted stains onto the fabric.
If you like your rusty pieces and want to push the rust dyeing technique further, rinse the fabric and neutralize with baking soda added to water, rinse it again and then rust the fabric once more. The neutralizing step will help prevent the fabric from rotting through.
Natural rust is an iron oxide. It comes in about ten or more natural colors depending on what it is in the neighboring the iron ore. Wear gloves and a mask when working with it. Iron in this form wants to bind with your hemoglobin blocking all available sites for oxygen. You can become gravely ill from too much contact with raw iron products. In addition, tolerance to raw iron varies with each person.
You can mix a small amount natural rust with water, I generally use one teaspoon rust to one cup liquid, or with soy milk to paint fabric. Stir well. Let it sit for 24 hours to ensure that all of the color will dissolve. Then apply the rust solution to the fabric. Use a old brush you can dedicate to this kind of project. Natural bristle brushes work best with this technique allowing the liquid to wick up the bristles and not leave a mess on your fabric. Cure the fabric dry for 24 hours. Rinse and neutralize your fabric in a saltwater solution.
When using the rust technique if you want the process to stop you need to neutralize it with a baking soda and water solution. Dissolve a couple of tablespoons of baking soda into one gallon of hot water. I do this in a five-gallon bucket. Soak your fabric in the solution about fifteen minutes. Wash the fabric using a non-phosphorous soap or a mild color free shampoo.
I teach workshops on rust dyeing, several workshops on natural dyeing and several for clay/pigment dyeing
Rust and Clay Dyeing e-Book (63 pages) $9.95
In this book Kimberly Baxter Packwood covers multiple techniques on rust dyeing, how to obtain rust, and how to stop it's progression. Step-by-step detailed color photos.
Chapter 1 Rust Dyeing
Chapter 2 Earth and Iron Oxide Dyeing
Chapter 3 Discharge Dyeing Rust
Chapter 4 Pigment, Ocher, & Clay Painting
Chapter 5 Resists & Other Techniques
If you found the information on this page to be helpful, please consider making a donation. I spend many hours researching and testing natural dye techniques, to ensure that you will achieve the best results when working with natural dyes. Your donation will allow me to continue with these endeavors. Thank you ~ Kimberly